Jump to content

CS 36 Merlin

From Wikipedia, the free encyclopedia

CS 36 Merlin
Development
DesignerTony Castro
LocationCanada
Year1986
No. built100
Builder(s)CS Yachts
NameCS 36 Merlin
Boat
Displacement13,000 lb (5,897 kg)
Draft6.25 ft (1.91 m)
Hull
TypeMonohull
ConstructionFibreglass
LOA36.00 ft (10.97 m)
LWL29.17 ft (8.89 m)
Beam11.50 ft (3.51 m)
Engine typeVolvo Penta diesel engine 25 hp (19 kW)
Hull appendages
Keel/board typefin keel
Ballast5,590 lb (2,536 kg)
Rudder(s)internally-mounted spade-type/ rudder
Rig
GeneralMasthead sloop
I foretriangle height45.50 ft (13.87 m)
J foretriangle base14.30 ft (4.36 m)
P mainsail luff39.50 ft (12.04 m)
E mainsail foot14.30 ft (4.36 m)
Sails
Mainsail area282.43 sq ft (26.239 m2)
Jib/genoa area325.33 sq ft (30.224 m2)
Total sail area607.75 sq ft (56.462 m2)
Racing
PHRF141 (average)

The CS 36 Merlin is a Canadian sailboat, that was designed by Tony Castro and first built in 1986. The design is out of production.[1][2][3]

Production

[edit]

The boat was built by CS Yachts in Canada, who completed 100 examples between 1986 and 1990.[1][4]

The CS 36 Merlin was produced for almost a year side-by-side with the CS 36, which then became known as the CS 36 Traditional. After the production overlap the Merlin replaced the CS 36 in company's line.[5]

About 20 of the 100 Merlins built were supplied to charter operators for their fleets.[1]

Design

[edit]
CS 36 Merlin showing transom configuration

The CS 36 Merlin is a small recreational keelboat, built predominantly of vacuum bag moulded fibreglass or Kevlar with a balsa wood core above the waterline. It has a masthead sloop rig, an internally-mounted spade-type rudder and a fixed fin keel. It displaces 13,000 lb (5,897 kg) and carries 5,590 lb (2,536 kg) of ballast.[1][2]

The boat has a draft of 6.25 ft (1.91 m) with the standard keel and 5.00 ft (1.52 m) with the optional wing keel.[1][6]

The boat is fitted with a Swedish Volvo Penta diesel engine of 25 hp (19 kW) as standard equipment. The fuel tank holds 40 U.S. gallons (150 L; 33 imp gal) and the fresh water tank has a capacity of 70 U.S. gallons (260 L; 58 imp gal).[1]

The boat was available with a long list of options, including a Kevlar or fibreglass hull, a swim platform or conventional transom; a 25 hp (19 kW), 28 hp (21 kW) diesel engine or a 43 hp (32 kW) turbocharged engine, a tall mast or regular mast and by the time production ended in 1990 there were four keel configurations: shoal, wing, deep and performance bulb. As a result of the long options list, no two boats outside the charter fleets were built in the same configuration.[1]

The boat has a PHRF racing average handicap of 141 with a high of 141 and low of 141. It has a hull speed of 7.24 kn (13.41 km/h).[2]

See also

[edit]

References

[edit]
  1. ^ a b c d e f g Browning, Randy (2017). "CS 36 Merlin sailboat specifications and details". sailboatdata.com. Archived from the original on 8 December 2021. Retrieved 14 March 2017.
  2. ^ a b c InterVisionSoft LLC (2017). "Sailboat Specifications for CS 36 Merlin". Sailing Joy. Archived from the original on 15 March 2017. Retrieved 14 March 2017.
  3. ^ Browning, Randy (2017). "Tony Castro". sailboatdata.com. Archived from the original on 7 December 2021. Retrieved 8 December 2021.
  4. ^ McArthur, Bruce (2022). "CS Yachts (Canadian Sailcraft) 1963 - 1992". sailboatdata.com. Archived from the original on 29 October 2021. Retrieved 7 March 2022.
  5. ^ Browning, Randy (2017). "CS 36 sailboat specifications and details". sailboatdata.com. Archived from the original on 2 May 2021. Retrieved 14 March 2017.
  6. ^ InterVisionSoft LLC (2017). "Sailboat Specifications for CS 36 Merlin WK". Sailing Joy. Archived from the original on 15 March 2017. Retrieved 14 March 2017.
[edit]